Wurth HHS 2000 High pressure adhesive Lubricant (0893106)

Partly synthetic oil that is extremely resistant to high pressures
Eliminates squeaks and creaks and has excellent flow and penetration performance, as well as good corrosion protection.
Highly adhesive lubricant that is not spun away when used on turning and rotating parts
Compatible with O-rings/X-rings and plastics. Neutral behaviour on painted substrates.
Resistant to splash water and salt water, weak acids and bases
Free from silicone, resin and acids
Notice
Resistance to high pressure loads
The HHS 2000 lubricating film remains active and does not tear off despite the high pressure load and shearing motion of the base body. Reliably separates the counterpart-body from the base body and thus ensures optimum wear protection at higher pressure loads. This is only possible for dirt-free lubricating points, which is why we recommend a thorough and careful pre-clean with HHS Clean prior to application, art. 089310610.
Application area
Suitable for universal lubrication and for high pressure loads, e.g. shifting, accelerator and clutch linkages, Bowden cables, pins, joints, hinges, reversing levers, lock strikers, drag link ends, sliding rails, chain wheels, toothed racks and open gearwheels
Instructions
Shake the can before use, spray the parts and let it take effect briefly. After use, spray the can upside down until it is empty.
 
Chemical basis
Hydrocarbon
Oil basis
Mineral oil
Colour
Yellowish
Smell/fragrance
Oil
Density
0.742 g/cm³
Density conditions
at 20°C
Min. temperature conditions
-25 °C
Max. temperature conditions
180 °C
Max. temperature resistance
200 °C
Min. flashing point of active ingredient
300 °C
Kinematic oil basis viscosity
1500 cSt
Silicone-free
Yes
Acid-free
Yes
Resin-free
Yes
AOX-free
Yes
Resistance against
Salt water
Weak lyes
Weak acids
Splash
Contents
500 ml
Container
Can
Shelf life from production
24 Month